2001-2005 (more recent publications are listed elsewhere)






"Determination of  Sheet Topography using Shadow Moiré 


 TAPPI Journal, vol 4 (5), 7-10 (2005).

AHRENS, F., PATTERSON, T., MUELLER, S., and HOJJATIE, B., "Investigation of Paper Dryer Picking, Web Transfer and Quality issues using a New Web Adhesion and Drying Simulator", Brazilian J. Chem. Egg’s, vol 22 (02), 217-225, April-June, (2005).

AHRENS, F., HOJJATIE, B., and COFFIN, D., "Influence of Drying Variables in Development of Cockle: An Experimental Study", Drying Technology, In Press (2005).

LISEN, J., HOJJATIE, B., COFFIN, D., LAVRYKOV, S., RAMARAO, B. and BECKHAM, H., "Through-Plane Diffusion of Moisture in Paper Detected by Magnetic Resonance Imaging", Industrial and Engineering Chem. Res. 41(25), 6555-6565 (2002).

HOJJATIE, B., ABEDI, J., and COFFIN, D. , "Qualitative Determination of In-Plane Moisture Distribution in Paper", Tappi Journal , vol 84 (5), 71 (2001).

HABAGER, C., COFFIN, D., and HOJJATIE, B., "Moisture Accelerated Creep of Polymeric Fibers", Journal of Polymer Science, Part B polymer Physics, 39:2048-2062 (2001).

LEISEN, J., HOJJATIE, B., COFFIN, D.W., and BECKHAM, H.W., "In-Plane Moisture Transport in paper Detected by Magnetic Resonance Imaging", Drying Technology , 19(1), 199-206 (2001).


BLOOM, F., HOJJATIE, B., and ORLOFF, D.I. "Modeling and Analysis of Impulse drying Press Roll, Int. J

	Computer Modeling

 ",  Int. J

	Computer Modeling, (29), 59-88 (1999).


DeHOFF, P. H., ANUSAVICE, K.J., and HOJJATIE, B., "Thermal Incompatibility Analysis of Metal-Ceramic Systems based on Flexural Displacement Data ", J Biomed Mater Res, 41, 614-623 (1998).

ORLOFF, D.I.; HOJJATIE, B.; and BLOOM, F., "Heat Transfer in a Crown Compensated Press Roll" , Tribology Transaction, 39 (4), 745-756 (1996).

HOJJATIE, B.; BLOOM, F.; and ORLOFF, D.I., "Analysis of Lubrication for Controlled-Crown Press Rolls: A Parametric Study ", TAPPI Journal, 79(9), 164-171 (1996).

SOKOLOWSKI, T.M.; HOJJATIE, B.; NEMETH, M.N.; and ANUSAVICE, K.J., "Stress and Reliability Analysis of Metal-Ceramic Dental Crowns Roll", NASA Technical Mem., 7178 (10), 1-18, (1996).

BLOOM, F.; HOJJATIE, B.; and ORLOFF, D.I., "Analysis of a Crown-Compensated Impulse Drying Press Roll", Tappi J., 79 (9), 164-173 (1996).

HOJJATIE, B., and ORLOFF, D.I.; "Analysis of a Crown-Compensated Press used in Papermaking", Fluid Machinery, edited by U.S. Rohatgi, A. Ogut, and H. Hayami, FED-vol 222, (1995).

ANUSAVICE, K.J.; HOJJATIE, B.; and CHANG, T.C., "Effect of Grinding and Etching on Strength of Ion-Exchanged Porcelain", J Dent Res, 73 (8), 1444-1449, (1994).

HOJJATIE, B. and ANUSAVICE, K.J., "Tempering of Ceramics from Various Initial Temperatures", J Dent Res, 72(3), 566-571 (1993).

ANUSAVICE, K.J.; and HOJJATIE, B. "Tensile Stress in Glass-Ceramic Crowns: Effect of Flaws and Cement Voids", , Int J Prosth 4 (5), 3351-358 (1992).

ANUSAVICE, K.J. AND HOJJATIE, B., "Effect of Thermal Tempering on Strength and Crack Propagation Behavior of Feldspathic Porcelains", J Dent Res 70 (6), 1009-1013 (1991).



"Three Dimensional Finite Element Analysis of Castable Ceramic 


J Biomech, 23 (11), 1157-1166 (1990).


ANUSAVICE, K.J.; DEHOFF, P.H.; HOJJATIE, B.; AND GRAY, A., "Influence of Tempering and Contraction Mismatch on Crack Growth in Ceramic Surfaces", , J Dent Res 68 (7), 182-1187 (1989).

ANUSAVICE, K.J. and HOJJATIE, B., "Influence of Prepared Tooth Height on Stress Distribution in Ceramic Crowns", J Dent Res 67 (11), 1371-1375 (1989).

HOFFMAN, R.G.; ABELLA, G.S.; FRIEDL, S.E.; HOJJATIE, B.; and BARBEAU, G.R "Dosimetry of Plaque Ablation using Thermal and Thermal-Optical Probe Systems", SPIE vol. 1067, Optical Fibers in Medicine IV, 120-126, (1989).

COFFEY, J.P.; ANUSAVICE, K.J.; DEHOFFF, P.H.; LEE, R.B.; and HOJJATIE, B., "Influence of Contraction Mismatch and Cooling Rate on Flexural Failure of PFM Systems", J Dent Res 67 (1), 61-65 (1988).

ANUSAVICE, K.J. and HOJJATIE, B., "Influence of Icisal Length of Ceramic and Loading Orientation on Stress Distribution in Ceramic Crowns", J. Dent Res 67 (11), 1371-1375 (1988).

BEATTY, R.G.: VERTUCCI, F.J.: and HOJJATIE, B., ",Thermo-mechanical Compaction of Gutta-Percha: Effect of Speed and Duration", , Int Endo J, Vol. 21 (6), 367-375 (1988).

JAVID, N.S.; COLAIZZI, F.A.; HOJJATIE, B.; and CICILE, G.M., "Influence of Materials in Reproducibility of Centric Relation Records", , Int J Prosth1 (3), 286-290 (1988).

ANUSAVICE, K.J. and HOJJATIE, B "Stress Distribution in Metal-Ceramic Crowns with Facial Porcelain Margin", J Dent Res, 66 (9), 1493-1498 (1987).

ANUSAVICE, K.J.; HOJJATIE, B.; and DEHOFF "Influence of Metal Thickness on Stress Distribution in Metal-Ceramic Crowns" , J Dent Res, 65 (9), 1173-1178 (1986).